All You Need To Know About Tree Stumps And How To Effectively Remove Them

Stump Removal

While cutting down a tree in itself may seem like a daunting task, it is in-fact far easier when compared to removing a stump. When people hire a Tampa tree service to remove a tree in their backyard, the task of removing a stump is mainly taken care of by the company, for an additional fee. However, if you have felled the tree by yourself, the job of removing the stump is left on your shoulders. In such cases, there are some easy and effective tree stump removal methods that can be adopted to ensure that you do a thorough job without affecting the quality of your soil.

Before we get to the question of how to remove a tree stump, it is crucial to understand why the removal of a tree stump is essential. Unlike what several homeowners believe, an unsightly stump in your backyard can, in-fact, lower the value of your property by over 50%. However, money isn’t the sole reason why stumps should be removed. Let’s discuss why a tree stump should be removed sooner than later.

  • Decaying stumps can become a pest-infested zone. That’s right! A decaying stump can attract several pests like carpenter ants, beetles, wood-boring termites, and much more. The result is that once this stump becomes their home, they look for their next target, more surrounding trees and your home. Termites have short wings, and can easily travel great distances, especially during the swarming season. The insect will feed on your wood and will destroy it. If you have a piece of treasured wood furniture at home, it will be at risk.
  • Decaying stumps spread fungi and diseases. Unfortunately, the risk of these fungi and viruses spread to the nearby plants and trees, thus damaging and killing them in the process.
  • Stumps cause new tree growth. More often than not, the stump you leave behind contributes to fresh sprouts, thus, resulting in smaller trees growing around the stump. Not only does this become an eyesore, but it will also cost much more to remove this stump once the roots of this new tree establishes itself in the soil.

Now that you’ve understood why removing a tree stump is essential, let’s have a look at the variousways to remove tree stumps.

To figure out the best way to remove a tree stumpin your backyard, it is first necessary to assess the stump. A considerable size of tree stump will be something an inexperienced person can’t manage. It would be best to get the services of experts like Al Miley. They will ensure that the stump will be taken care of properly, and at the fastest turnaround time.

  • Certain stumps are easier to remove than the rest, and thus, knowing which technique needs to be implemented for which tree is essential.
  • For instance, removing the stumps of deciduous trees is far harder than say, pine tree stumps. The reason is that the roots of deciduous tend to be long and deep, while those of pine are shallow, wide, and flat.
  • Next, while looking at the best way to remove a tree stump,assessing the age and size of a tree is essential. In fact, the older the tree stump the easier it is to remove.
  • Similarly, it’s much easier to remove smaller stumps than larger ones.

When you hire a professional stump removal team like the Panorama Tree Care, their certified stump experts will visit your property, inspect your trees, offer you the appropriate solution, and finally, remove the stumps in no time. If this doesn’t feel like the right choice for you, you can always try out some DIY tree stump removal techniques.

How to Remove a Tree Stump?

  • Grind it Away

When removing a tree stump manually, most homeowners prefer renting a grinder as a method of DIY tree stump removal.Since renting these heavy-duty machines for a single day would cost anywhere between $100-200, it turns out to be a much cheaper way to remove tree stumps as opposed to hiring professionals. However, do keep in mind that a certain amount of manual labor, such as, clearing rocks, cutting away as much stump as possible with a chainsaw, and leveling of the ground is essential before raising the grinder wheel on the stump.

Renting a heavy-duty machine is cheaper but if you’re not very skilled in using one, it could cause an accident that may pose severe injury to anyone. Should you decide on going this route, make sure you have studied how to use the tool very well by watching videos and knowing the safety measures needed. Also, it’s imperative that you wear the proper safety clothing and equipment so you’re protected at all times.

  • Dig, Cut, Pull

Although this sounds like an easy way to remove tree stumps,it is much harder to perform. To pull off this project, you must first use a shovel to dig around the stump. Once the primary roots are exposed, dig down as much as possible to access all the roots. Once this is done, start cutting the roots with a saw or an ax. Once you’re done digging deep enough, it’s time to use a tow strap to lift the stump out. Like I said, easier said than done! So, before you get all macho on the stump, try contacting professional tree experts so they can schedule a free estimate and offer you one of the best ways to remove a tree stump. 

The three-step process must be accomplished correctly because if you improperly followed the steps, you’ll be left with a stump that’s more challenging to maneuver.

  • Burn it Away

Burning the stump away is one technique several homeowners like to adopt. However, do make sure that your stump is dry, and check with your local fire department if they allow for open burning of a stump. To try this DIY tree stump removal by burning, you first need to drill a hole at the center, as much as 10 inches deep. Continue drilling several such holes and maintain a distance of at least one inch between each hole. Next, pour potassium nitrate into each hole and top it up with hot water. Place some scrap wood at the top of your stump and light it up. Now, patiently wait for the stump to ignite and break any large roots with a shovel once the fire burns out.

Again, you need to follow safety measures in doing this. You have to ensure there are no kids around and that you’re wearing a mask because potassium nitrate when inhaled may cause respiratory problems including coughing and shortness of breath. It may also cause irritation on the skin.

  • Rot the Stump

Another effective DIY tree stump removal method is to rot your tree stump. To start with, drill holes into the stump about 8-10 inches deep. Once this is done, fill the holes with a high nitrogen substance, and finally, top it up with water. As the stump gradually softens, begin to chip off the pieces. You can finally fill the hole with dirt as needed.

  • Take the Chemical Route

Although considered a lengthy procedure, using a tree stump killer or a chemical stump removal is one of the best ways to remove a tree stump.Follow the same method of drilling holes into the stump as mentioned in the above two steps and pour liberal amounts of potassium nitrate into each one of the holes. Top it up with water and wait 4-6 weeks, or until the time you notice the stump becoming spongy. Once this happens, it becomes a cakewalk to ax the stump away.

Finally, remember, no matter which DIY tree stump removal method you adopt, or no matter how many different ways of removing tree stumps you search online, remember that a tree always has its roots firm to the ground, which is the reason why stump removal is never an easy task. Every effective way of removing tree stumps has ample manual labor or the use of potentially dangerous chemicals attached to it. So, before deciding on adopting one such DIY route, always seek some level of professional guidance.

Pipe Relining

Pipe Relining Guide For Workplace

Kitchen Counter With Fruits

What Are The Biggest Advantages Of Having White Kitchens?